Splash Shield Replacement

NOTE: Take care not to scratch the body.

1.Remove the splash shield (A).

-1 From both wheel arch, remove the bolts (B), clips (C), and clip (D) (right side for some models) securing the front inner fender (E) and splash shield (on the body).
-2 From under the front bumper (F), remove the clips (C), and bolts (G) (with engine under cover).
-3 Release the hooks (H) of the splash shield, then pull the splash shield out.

2.Install the splash shield in the reverse order of removal, and note these items:

  • Replace any damaged clip.
  • Push the clips into place securely.