Front Door Glass Outer Weatherstrip Replacement

Front Door Glass Outer Weatherstrip Replacement

NOTE:

Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
Put on gloves to protect your hands.
Take care not to scratch the door.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1.	Remove these items: Door panel Power mirror

2.	Remove the screw from the rear edge of the door.

3.	Starting at the rear, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the window slot, then remove the weatherstrip.

4.	Install a new weatherstrip in the reverse order of removal.