| 1. | Remove the fuel pump. |
| 2. | Remove the clip (A). |
| 3. | Remove the fuel pressure regulator (B). |
| 4. | Install the regulator in the reverse order of removal with new O-rings (C). Make sure the regulator is installed with the drain hall (D) of the regulator is faced down. |
| 1. | Remove the fuel pump. |
| 2. | Remove the holder (A). |
| 3. | Remove the fuel pressure regulator (B). |
| 4. | Install the regulator in the reverse order of removal with new O-ring (C). NOTE: Coat the O-ring with clean engine oil. |