Rocker Arms and Shafts Disassembly/Reassembly

NOTE:

• Identify parts as they are removed to ensure reinstallation in original location.
  
• Inspect the rocker arm shaft and rocker arms.
  
• The rocker arms must be installed in the same positions if reused.
  
• When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders and rocker arms on the shaft.
  
• Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.
  
• Bundle the intake rocker arms with rubber bands to keep them together as a set.
  

K20A6 engine:

K24A3 engine: