| 1. | Drain the engine coolant. |
| 2. | Remove the lower radiator hose from the radiator. |
| 3. | Remove the automatic transmission fluid (ATF) cooler hoses (A/T). |
| 4. | Remove the upper radiator hose and lower radiator hose from the radiator. |
| 5. | Disconnect the fan motor connectors and radiator fan switch connector. |
| 6. | Remove the upper bracket cushions, then pull up the radiator. |
| 7. | Remove the fan shroud assemblies and other parts from the radiator. |
| 8. | Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely. |
| 9. | Fill the radiator with engine coolant and bleed the air. |