A/T Interlock System - Shift Lock System Circuit Troubleshooting
K24Z3 Engine Model
  1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard.
  1. Make sure the HDS communicates with the PCM. If it does not, go to the DLC circuit troubleshooting.
  1. Select Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
Does the shift lock solenoid work properly?
YES -
Go to Step 15 .
NO -
Go to Step 4 .
  1. Remove the shift lever.
  1. Disconnect the shift lock solenoid connector.
  1. Turn the ignition switch to ON (II).