Tighten the front engine mount bracket mounting bolt (A) to 54 N·m (5.5 kgf·m, 40 lbf·ft).

Install the front engine mount stop (B) and the vacuum hose clamp bracket (C) with new nuts.

Install the vacuum hose (D) on the pipe (E) and the clamp (F) at the mark (G).

Tighten the rear engine mount bracket mounting bolt to 78 N·m (8.0 kgf·m, 58 lbf·ft).

Tighten the transmission upper mount bracket mounting bolts to 59 N·m (6.0 kgf·m, 43 lbf·ft).