DTC Troubleshooting: P0351 (71), P0352 (72), P0353 (73), P0354 (74)
DTC P0351:
 No. 1 Cylinder Ignition Coil Circuit Malfunction
DTC P0352:
 No. 2 Cylinder Ignition Coil Circuit Malfunction
DTC P0353:
 No. 3 Cylinder Ignition Coil Circuit Malfunction
DTC P0354:
 No. 4 Cylinder Ignition Coil Circuit Malfunction
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.
  1. Turn the ignition switch to ON (II).
  1. Clear the DTC with the HDS.
  1. Start the engine.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC P0351, P0352, P0353, and/or P0354 indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the ignition coil and the ECM/PCM.■
  1. Turn the ignition switch to LOCK (0).
  1. Exchange the ignition coil from the problem cylinder with one from another cylinder.
  1. Start the engine.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC indicated at the exchanged cylinder?
YES -
Replace the faulty ignition coil , then go to Step 25 .
NO -
Go to Step 9 .
  1. Turn the ignition switch to LOCK (0).
  1. Check the No. 13 IG COIL (15 A) fuse in the under-hood fuse/relay box.
Is the fuse OK?
YES -
Go to Step 11 .
NO -
Go to Step 12 .
  1. Test the ignition coil relay (A) in the under-hood fuse/relay box .
Is the ignition coil relay OK?
YES -
Go to Step 15 .
NO -
Replace the ignition coil relay, then go to Step 25 .