M/T Assembly Installation
  1. Install both sides of the front subframe mid mount (A) with new bolts.
  1. Install the ground cable (B) to the transmission housing.
  1. Install the exhaust pipe A with the gaskets.
  1. Refill the MTF to the proper level.
  1. Install the splash shield.
  1. Connect the knuckle ball joint onto the lower arm.
  1. Install the damper fork.
  1. With HID lamp model: Connect the front suspension stroke sensor connector.
  1. Clean the mating surfaces of the brake disc and the inside of the wheel, then install the front wheels.
  1. Lower the vehicle on a lift.