Engine Oil Pump Overhaul
  1. Measure the inner diameter of the No. 1 bearing for the front balancer shaft hole and the rear balancer shaft hole.
    Bearing Inner Diameter
    Front:
    Standard (New):
    20.000−20.020 mm (0.7874−0.7882 in.)
    Service Limit:
    20.03 mm (0.789 in.)
    Rear:
    Standard (New):
    24.000−24.020 mm (0.9449−0.9457 in.)
    Service Limit:
    24.03 mm (0.946 in.)


Front
Rear