Connecting Rod and Crankshaft End Play Inspection
  1. Remove the oil pump.
  1. Remove the baffle plate.
  1. Measure the connecting rod end play with a feeler gauge between the connecting rod and the crankshaft.
    Connecting Rod End Play
    Standard (New):
    0.15−0.35 mm (0.006−0.014 in.)
    Service Limit:
    0.40 mm (0.016 in.)

  1. If the connecting rod end play is beyond the service limit, install a new connecting rod, and recheck. If it is still beyond the service limit; replace the crankshaft.