Engine Oil Pan Removal
  1. If the engine is already out of the vehicle, go to Step 13 .
  1. Remove the vacuum hose (A), front engine mount stop (B), and vacuum hose bracket (C), then remove the front engine mount bolt (D).
  1. Raise the vehicle on the lift to pull height.
  1. Remove the left front wheel.
  1. Remove the splash shield.
  1. Drain the engine oil.
  1. Remove the left side damper fork.
  1. Separate the left side knuckle from the lower arm.
  1. Remove the left side driveshaft. Coat all precision-finished surface with new engine oil. Tie a plastic bag over the driveshaft end.