VTC Actuator Inspection
  1. Check that the VTC actuator moves smoothly. If the VTC actuator does not move smoothly, replace the VTC actuator.
  1. Remove the tape and adhesive residue from the camshaft journal.
  1. Make sure the punch marks on the VTC actuator and the exhaust camshaft sprocket are facing up, then set the camshafts in the head.
  1. Set the camshaft holders and chain guide B in place.
  1. Tighten the camshaft holder bolts to the specified torque.
  1. Hold the camshaft, and turn the VTC actuator clockwise until you hear it click. Make sure to lock the VTC actuator by turning it.
  1. Install the cam chain.
  1. Adjust the valve clearance.