Install the crankshaft pulley, and hold the pulley with the handle (A) and the crankshaft pulley holder (B).
Tighten the bolt to 49 N·m (5.0 kgf·m, 36 lbf·ft) with a torque wrench and a 19 x 90L socket (C). Do not use an impact wrench. If the pulley bolt or crankshaft are new, tighten the bolt to 177 N·m (18.0 kgf·m, 130 lbf·ft), then remove the bolt and tighten it to 49 N·m (5.0 kgf·m, 36 lbf·ft).