-
Check the total runout with the camshaft supported on V-blocks.
-
If the total runout of the camshaft is within the service limit, replace the cylinder head.
-
If the total runout is beyond the service limit, replace the camshaft and recheck the camshaft-to-holder oil clearance. If the oil clearance is still beyond the service limit, replace the cylinder head.
|
Camshaft Total Runout
|
|
Standard (New):
|
0.03 mm (0.001 in.) max.
|
|
Service Limit:
|
0.04 mm (0.002 in.)
|
|
|