Cylinder Head Removal
  1. Remove the two bolts (A) securing the connecting pipe.
  1. Remove the water bypass hose (B).
  1. Remove the following engine wire harness connectors and wire harness clamps from the cylinder head:
    • Engine coolant temperature (ECT) sensor 1 connector
    • Camshaft position (CMP) sensor A (Intake) connector
    • Camshaft position (CMP) sensor B (Exhaust) connector
    • Rocker arm oil control solenoid connector
    • Rocker arm oil pressure switch connector
    • EVAP canister purge valve connector
    • Variable valve timing control (VTC) oil control solenoid valve connector
    • Engine oil pressure switch connector
  1. Remove the cam chain.
  1. Remove the rocker arm assembly.