Water Pump Replacement
  1. Remove the water pump pulley (A).
  1. Remove the seven bolts securing the water pump, then remove the water pump (B).
  1. Inspect, and clean the O-ring groove and mating surface with the water passage.
  1. Install the water pump with new O-ring (C) and the water pump pulley in the reverse order of removal.
  1. Install the oil cooler hose joint pipe with new O-ring.
  1. Clean up any spilled engine coolant.
  1. Install the drive belt auto-tensioner.
  1. Refill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open.