A/T Paddle Shifter - (Downshift Switch) Circuit Troubleshooting
  1. Check for continuity between paddle shifter − (downshift switch) connector terminals No. 3 and No. 4 when pressing the paddle shifter − (downshift switch) and when the paddle shifter − (downshift switch) is released.
Is there continuity when pressing the paddle shifter − (downshift switch) and no continuity when the paddle shifter − (downshift switch) is released?
YES -
Replace the cable reel subharness.■
NO -
Replace the paddle shifter − (downshift switch). ■
  1. Remove the cable reel.