A/T Assembly Installation
  1. Install the harness holder (A) on the bracket, and secure it with the bolts (B).
  1. Connect these harness connectors, and install the harness clamps:
    • Exhaust gas recirculation (EGR) valve connector (C)
    • Engine coolant temperature (ECT) sensor 1 connector (D)
    • Evaporative emission (EVAP) canister purge valve connector (E)
    • Camshaft position (CMP) sensor connector (F)
  1. Connect the breather hose (G) on the cylinder head cover, and secure the hose with the clip.
  1. Install the engine mount control solenoid valve (H) on the water outlet and secure it with the bolt.