A/T Assembly Installation
  1. Tighten the front engine mount bracket mounting bolt (A) to 54 N·m (5.5 kgf·m, 40 lbf·ft).
  1. Install the front engine mount stop (B) with new nuts.
  1. Tighten the rear engine mount bracket mounting bolt to 78 N·m (8.0 kgf·m, 58 lbf·ft).
  1. Tighten the transmission upper mount bracket mounting bolts to 59 N·m (6.0 kgf·m, 43 lbf·ft).