Loosely tighten the subframe mounting bolt (A) in the right rear stiffener; insert the subframe alignment pin through the positioning slot (B) on the right rear stiffener, through the positioning hole (C) on the front subframe, and into the positioning hole on the body, then tighten the front subframe mounting bolt until the front subframe insulator contacts the body.
Loosely tighten the front subframe mounting bolts in the right front stiffener, left front stiffener, and, left rear stiffener in the same manner in
Step 22
.
Reinsert the subframe alignment pin through the positioning slot on the right rear stiffener, through the positioning hole on the front subframe, and into the positioning hole on the body, then tighten the front subframe mounting bolt to the specified torque.
Tighten the subframe mounting bolts in the right front stiffener, left front stiffener, and, left rear stiffener in the same manner in
Step 24
.
Tighten the right and left front subframe mounting bolts to the specified torque.
Check that the positioning holes and slots are aligned using the subframe alignment pin.
Tighten the rear and front stiffener mounting bolts to the specified torque.