A/T Assembly Removal
  1. Remove the engine mount control solenoid valve (A) from the water outlet.
  1. Disconnect these harness connectors, and remove the harness clamps:
    • Exhaust gas recirculation (EGR) valve connector (B)
    • Engine coolant temperature (ECT) sensor 1 connector (C)
    • Evaporative emission (EVAP) canister purge valve connector (D)
    • Camshaft position (CMP) sensor connector (E)
  1. Remove the breather hose (F) from the cylinder head cover, then remove the bolts (G) securing the harness holder (H), and remove the harness holder from its bracket.