DTC Troubleshooting: P0443 (92)
  1. Measure the voltage between EVAP canister purge valve 2P connector terminal No. 1 and body ground.
Is there battery voltage?
YES -
Go to Step 18 .
NO -
Repair open in the wire between the EVAP canister purge valve and the No. 7 ACG (15A) fuse in the driver's under-dash fuse/relay box, then go to Step 24 .
  1. Turn the ignition switch to LOCK (0).
  1. Jump the SCS line with the HDS.
  1. Disconnect ECM/PCM connector B (44P).