DTC Troubleshooting: P0443 (92)
  1. Check for continuity between EVAP canister purge valve 2P connector terminal No. 2 and body ground.
Is there continuity?
YES -
Repair short in the wire between the EVAP canister purge valve and the ECM/PCM (B3), then go to Step 24 .
NO -
Go to Step 30 .
  1. Turn the ignition switch to LOCK (0).
  1. Disconnect the EVAP canister purge valve 2P connector.
  1. Turn the ignition switch to ON (II).