DTC Troubleshooting: P0351 (71), P0352 (72), P0353 (73), P0354 (74)
  1. Check for continuity between ignition coil 3P connector terminal No. 2 of the problem cylinder and body ground (see table).
    PROBLEM CYLINDER
    DTC
    No. 1
    P0351
    No. 2
    P0352
    No. 3
    P0353
    No. 4
    P0354

Is there continuity?
YES -
Go to Step 21 .
NO -
Repair open in the wire between the ignition coil and G101; A/T, M/T, then go to Step 25 .
  1. Jump the SCS line with the HDS.
  1. Disconnect ECM/PCM connector C (44P).