M/T Assembly Installation
  1. Connect the vacuum hose (A), then install the vacuum hose bracket (B).
  1. Loosely install the new front engine mount bolt (C).
    NOTE: Install the engine mount stop (D) after tightening the front engine mount bolt to the specified torque.
  1. Remove the engine support hanger.
  1. Tighten the rear engine mount bolts to the specified torque value.
  1. Tighten the transmission mount bolts to the specified torque value.
  1. Tighten the front engine mount bolt to the specified torque value, then install the engine mount stop with new nuts.