M/T Assembly Installation
  1. Align the front suspension subframe using the subframe alignment pin (A). Vertically install the subframe alignment pin, and align the right-rear corner of the subframe and vehicle frame holes, then loosely tighten the subframe mounting bolt (B) until the front suspension subframe contacts the body frame.
  1. Loosely tighten the left-rear subframe mounting bolt using the same procedure as the right-rear with the subframe alignment pin.
  1. Partially tighten the right and left front subframe mounting bolts.
  1. Tighten the right-rear subframe mounting bolt to the specified torque with the subframe alignment pin in the positioning hole.
  1. Tighten the left-rear subframe mounting bolt to the specified torque with the subframe alignment pin in the positioning hole.