M/T Assembly Removal
Special Tools Required

Engine support hanger
 AAR-T1256-J00

Subhanger stay
 07MAK-PY30100
R20A3 Engine Model
NOTE: Use fender covers to avoid damaging painted surfaces.
  1. Secure the hood in the wide open position with the support strut.
  1. Do the battery removal procedure.
  1. Remove the intake air duct.
  1. Remove the air cleaner housing.
  1. Remove the front grille cover.
  1. Remove the strut brace.
  1. Disconnect the ECM connectors, then remove the ECM.
  1. Remove the ground cable clamp (A), upper battery base mounting bolts (B), and loosen the under battery base mounting bolts (C), then remove the battery base (D).