Brake Booster Replacement
  1. Remove the brake booster (A) by pulling it out and turning it, and remove it from the engine compartment.
    • Be careful not to damage the booster surfaces and the threads of the booster stud bolts.
    • Be careful not to bend or damage the brake lines or other components hoses and lines.
    NOTE: Use the new brake booster gasket (B) reassembly.
  1. Install the brake booster in the reverse order of removal, and note these items:
    • Install the master cylinder after installing the brake booster.
    • Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary.
    • Bleed the brake system.