SIL Troubleshooting
  1. Connect clutch switch (SIL) 2P connector terminals No. 1 and body ground with a jumper wire.
  1. Turn the ignition switch to ON (II).
  1. Check the CLUTCH SWITCH (SIL) in the DATA LIST with the HDS.
Is ON indicated?
YES -
Go to Step 24 .
NO -
Repair open in the wire between the clutch switch (SIL) and body ground (LHD model: G302, RHD model: G251).■
  1. Turn the ignition switch to LOCK (0).
  1. Jump the SCS line with the HDS.
  1. Disconnect ECM connector A (44P).