DLC Circuit Troubleshooting
  1. Check for continuity between ECM/PCM connector terminal C36 and body ground.
Is there continuity?
YES -
Repair short in the wire between the No. 9 FUEL PUMP (20 A) fuse and the ECM/PCM (C36), between the No. 9 FUEL PUMP (20 A) fuse and PGM-FI main relay 2 (FUEL PUMP), or between the No. 9 FUEL PUMP (20 A) fuse and the immobilizer control unit. Also replace the No. 9 FUEL PUMP (20 A) fuse.■
NO -
Go to Step 51 .
  1. Remove the rear seat cushion.
  1. Remove the access panel from the floor.
  1. Disconnect the fuel pump 4P connector.