Balancer Shaft/Balancer Shaft Holder Assembly Overhaul
|
Balancer Shaft Inspection
-
Seat the balancer shaft by pushing it away from the balancer shaft sprocket end of the balancer shaft holder.
-
Zero the dial indicator against the end of the balancer shaft, then push the balancer shaft back and forth and read the end play.
|
Balancer Shaft End Play
|
|
Front Balancer Shaft:
|
|
Standard (New):
|
0.05−0.10 mm (0.002−0.004 in.)
|
|
Service Limit:
|
0.135 mm (0.0053 in.)
|
|
Rear Balancer Shaft:
|
|
Standard (New):
|
0.05−0.10 mm (0.002−0.004 in.)
|
|
Service Limit:
|
0.135 mm (0.0053 in.)
|
|
|