Crankshaft Pulley Removal and Installation
Special Tools Required

Handle, 6-25-660L
 07JAB-001020B

Crankshaft pulley holder, 50 offset 65
 070AB-RJA0100

Socket wrench, 19 x 90L
 07JAA-001020A
Removal
  1. Remove the right front wheel.
  1. Remove the splash shield.
  1. Remove the drive belt.
  1. Hold the pulley with the handle (A) and the crankshaft pulley holder (B).
  1. Remove the bolt with a 19 x 90L socket (C) and a breaker bar, then remove the crankshaft pulley.