A/T Gear Position Indicator Panel Light Harness Replacement
  1. Install the A/T gear position indicator panel base (A) on the shift lever bracket.
    NOTE: Take care not to pinch the harnesses.
  1. Route the A/T gear position indicator panel light harness (B), the park pin switch harness (C), and the shift lock solenoid harness. Take a slack out of the harnesses, and secure the harnesses with at the harness guide.
  1. Install the A/T gear position indicator panel light socket (D) in the panel base.
  1. Install the shift lever knob.
  1. Install the shift lever assembly.