A/T Gear Position Indicator Panel Light Harness Replacement
RHD Model
NOTE: The A/T gear position indicator panel light, the park pin switch, and the shift lock solenoid harness are not available separately. Replace the A/T gear position indicator panel light, the park pin switch, and the shift lock solenoid harness as a set.
  1. Remove the shift lever assembly.
  1. Remove the shift lever knob.
  1. Remove the A/T gear position indicator panel base.
  1. Release the lock (A) of the shift lock release extension (B), then remove the shift lock release extension.
  1. Remove the shift lock solenoid.