M/T Mainshaft Assembly Clearance Inspection
  1. Measure the clearance between 6th gear (A) and the angular ball bearing (B) with a feeler gauge (C). If the clearance is more than the service limit, go to Step 11 .

    R20A3 Engine Model:

    Standard:
    0.06−0.16 mm (0.002−0.006 in.)
    Service Limit:
    0.25 mm (0.010 in.)


    K24Z3 Engine Model:

    Standard:
    0.15−0.25 mm (0.006−0.010 in.)
    Service Limit:
    0.34 mm (0.013 in.)