M/T Mainshaft Assembly Clearance Inspection
-
Support the bearing inner race with an appropriate sized socket (A), and push down on the mainshaft (B).
-
Measure the clearance between 2nd gear (C) and 3rd gear (D) with a feeler gauge (E).
-
If the clearance is more than the service limit, go to
Step 3
.
-
If the clearance is within the service limit, go to
Step 4
.
|
Standard:
|
0.06−0.16 mm (0.002−0.006 in.)
|
|
Service Limit:
|
0.25 mm (0.010 in.)
|
|
|