Clutch Replacement
  1. Measure the clutch disc thickness. If the measurement is less than the service limit, replace the clutch disc.
    R20A3 engine model:
    Standard (New):
    8.25−8.95 mm (0.325−0.352 in.)
    Service Limit:
    6.0 mm (0.24 in.)
    K24Z3 engine model:
    Standard (New):
    7.30−7.90 mm (0.287−0.311 in.)
    Service Limit:
    6.0 mm (0.24 in.)