DTC Troubleshooting: 12-1x
  1. Install a jumper wire between the No. 2 and the No. 3 terminals of the dashboard wire harness 4P connector.
  1. Do the battery terminal reconnection procedure.
  1. Read the DTC.
Is DTC 11-1x indicated?
YES -
Go to Step 16 .
NO -
Open in the cable reel; replace the cable reel. ■
  1. Turn the ignition switch to LOCK (0).
  1. Do the battery terminal disconnection procedure , then wait for 3 minutes.
  1. Disconnect SRS unit connector A (39P) from the SRS unit.