DTC Troubleshooting: 85-61, 85-62
  1. Measure the resistance between the No. 12 terminal of the OPDS unit harness 18P connector and body ground. There should be 0−1.0 Ω
Is the resistance as specified?
YES -
Go to Step 9 .
NO -
Open between the No. 12 terminal of the OPDS unit harness 18P connector and body ground (G701) or poor connection at G701. ■
  1. Do the battery terminal disconnection procedure , then wait for 3 minutes.
  1. Disconnect SRS unit connector B (39P) from the SRS unit.