DTC Troubleshooting: 76-61, 76-62
  1. Check resistance between the No. 1 terminal of SRS unit connector B (39P) and the No. 6 terminal of the left engine compartment subharness 14P connector (LHD models) or E-pretensioner subharness 14P connector (RHD models). There should be 0−1.0 Ω.
Is the resistance as specified?
YES -
Faulty E-pretensioner unit; replace the E-pretensioner unit. ■
NO -
Open between the No. 1 terminal of SRS unit connector B (39P) and the No. 6 terminal of the left engine compartment subharness 14P connector (LHD models) or E-pretensioner subharness 14P connector (RHD models).■