DTC Troubleshooting: 76-61, 76-62
  1. Check resistance between the No. 1 terminal of SRS unit connector B (39P) and body ground. There should be an open circuit or at least 1 MΩ.
Is the resistance as specified?
YES -
Go to Step 18 .
NO -
Short to ground between the No. 1 terminal of SRS unit connector B (39P) and the No. 6 terminal of the left engine compartment subharness 14P connector (LHD models) or E-pretensioner subharness 14P connector (RHD models).■