DTC Troubleshooting: B1220 (L and A/C ON)
-
While checking the same terminal for voltage to ground, reconnect these items individually and note the voltage reading each time:
-
Driver's air mix control motor
-
Passenger's air mix control motor
-
Recirculation control motor
-
Mode control motor
|
Does the voltage remain at about 5 V?
|
|
YES
|
-
|
Substitute a known-good heater control unit and recheck. If the symptom/indication goes away, replace the original
heater control unit
.■
|
|
NO
|
-
|
Replace the component that caused the voltage drop.■
|
|
|