Power Window Rear Motor Test - Without All Power Windows AUTO UP/DOWN Function
  1. Check for continuity between the rear power window switch 14P connector No. 1 and No. 7 terminals and the rear power window motor 2P connector No. 1 and No. 2 terminals respectively. There should be continuity.
    REAR POWER WINDOWSWITCH 14P CONNECTOR
    REAR POWER WINDOWMOTOR 2P CONNECTOR
    No. 1 terminal
    No. 1 terminal
    No. 7 terminal
    No. 2 terminal

  1. If the wire harness is OK, replace the rear power window motor.