-
Attach the rubber dam B with adhesive tape to the inside surface of the windshield (A) as shown.
-
Be sure the rubber dam lines up with the alignment marks (C).
-
With the edge (D) of the black ceramic on the windshield as a guide, attach the rubber dam B to the windshield.
-
Be careful not to touch the windshield where adhesive will be applied.
|
Rubber dam adhesive tape:
|
|
|
Thickness 0.16 mm (0.006 in.)
|
|
|
Width 3.5 mm (0.14 in.)
|
|
|