Keyless Entry Transmitter Test
Replace the transmitter battery (A) with a new one, and press lock or unlock button and check the receive condition on the screen of the HDS.
If KEYLESS ENTRY TRANSMITTER CODE IS RECEIVED is indicated, the transmitter is OK.
If KEYLESS ENTRY TRANSMITTER CODE IS NOT RECEIVED is indicated, go to
Step 7
.
Use a different known-good keyless transmitter assembly and repeat
Step 3
and 4.
NOTE: The keyless transmitter does not need to be programmed to the vehicle for this test.
If (DIFFERENT) KEYLESS ENTRY TRANSMITTER CODE IS RECEIVED is indicated, replace the keyless transmitter and
do the immobilizer system registration.
If KEYLESS ENTRY TRANSMITTER CODE IS NOT RECEIVED is indicated, the
immobilizer-keyless control unit is faulty, replace it
and do the immobilizer system
registration.
NOTE: As the keyless transmitter is combined with the immobilizer transponder, so when the transponder is registered by the HDS, the keyless transmitter is also registered automatically.