Front Seat Slide Motor Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
8-way Power Seat
NOTE:
  • Put on gloves to protect your hands.
  • The driver's seat on LHD model is shown; the passenger's seat is symmetrical; the ones on RHD model are similar.
  1. Remove the front seat.
  1. Remove the seat cushion cover/pad.
  1. Remove the flex cable (A) and the cable housing (B).
    -1.
    Release the housing from the hooks (C).
    -2.
    Disconnect the cable from the worm gear (D) in the inner seat track by pulling out the housing.
    -3.
    Disconnect the cable from the slide motor (E).
    NOTE: Take care not to kink the cable.