Front Seat Cushion Cover Replacement

  1. From under the seat cushion, disconnect and/or detach the connector(s):
    • Driver's seat:
    • -
      Side airbag connector (A)
      -
      Recline motor harness connector (B) (8-way power seat)
      -
      Seat-back heater connector (C) (8-way power seat/some manual height adjustable seat)
      -
      Seat cushion heater connector (D) (8-way power seat/some manual height adjustable seat)
    • Passenger's seat:
    • -
      Side airbag connector (A)
      -
      Recline motor harness connector (B) (8-way power seat)
      -
      Seat-back heater connector (C) (8-way power seat without OPDS/some manual seat without OPDS)
      -
      Seat cushion heater connector (D) (8-way power seat/some manual height adjustable seat)
      -
      Passenger's seat sitting switch connector (E)
      -
      OPDS unit harness connector (F) (for some models)
  1. Detach the harness clips (G), and remove the harness clamps (H).

Driver's seat (8-way power seat)
Driver's seat (except 8-way power seat)
Passenger's seat without OPDS (8-way power seat)
Passenger's seat without OPDS (manual seat)
Passenger's seat with OPDS on RHD model (8-way power seat)
Passenger's seat with OPDS on RHD model (manual seat)