Front Seat Lumbar Support Replacement
Driver's Seat (For Some Models)
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to kink the cable.
  • Take care not to tear the seams or damage the seat covers.
  • The driver's seat on the LHD model is shown; the one on the RHD model is symmetrical.
  1. Remove the front seat.
  1. Remove the seat-back cover and pad.
  1. Remove the cable clamp (A) fastening the lumbar support cable (B).