Interior Trim Removal/Installation - Rear Shelf Area
Rear Speaker Grille
NOTE:
  • Take care not to bend or scratch the rear shelf and the trim.
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  1. Remove the rear speaker grille (A). The left side is shown; the right side is symmetrical.
    -1.
    Using a flat-tip screwdriver wrapped with protective tape, pry up the notch (B) of the grille to detach the hook (C).
    -2.
    Pull up along the edge of the grille to detach the clips and the hooks (D).
    -3.
    Pull the grille back to release the hooks (E) from the rear shelf (F).
  1. Install the grille in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips and the hooks into place securely.